QRV
on
10m band
SB LP
at
CQWW CW Contest



Yesterday Cees PA3FXO visit us on south Rhodes. Cees spend the holidays with his family at Faliraki Rhodes and as promished his passing to say hello. He is an interesting person with a wide spectrum of knowledge and a real Amateur Radio man. We have a nice talk for about 2 hours under shadow with about 36 Celcius around....hi hi
Up for sale the 144 to 28 mhz No-Tune transverter board. It had been invented and built by one of our Ukrainean HAMs. The transverter has been tested and it works very good. And I can assure you it does. With this transverter you can operate on the 144-146 mhz band useing any type of HF radio at 28 to 30 mhz. You should apply only 100 mWt (0.1 Watts) to it on 10m band to get 10-12 W output power on 2m band. There is no antenna relay required. This auction is included the completely built and tested transverter board and the schematic diagram of the transverter. I made a translation from Russian to English and printed the text there on the back side of the sheet. There is No-Tune transverter. You should only place the board onto the radiator get necessary connection and it's ready to operate. This transverter so small that you can even place it inside your HF radio!
Below the basic information about this transverter:
The power voltage is 12 V.
The Input RF power on 28mhz is about 100mWt (0.1 Watts).
Output power on 144 mhz is 10-12 W
LO freq is 116 mhz and the crystal it already installed on the board.
TX Output transistor is RD15HVF1
RX Input transistor is BF998
PTT to ground.
The size of the board is 7cm x 3.5cm
The lot does not include the heatsink , power and RF connectors, wires or cables.
To get the transverter worked you have to do some soldering works with a cables , wires and connectors. Probably some instruments would be required.
I ship Worldwide from the Ukraine by Airmail with insurance and provide a tracking number that can be easily tracked through the Internet here. Usually shipping takes up to two weeks but it can be more or less delivery time depending on how quickly the package goes through Customs
Thanks for watching my auction.
After 10 days the transverters arrives and last night (due to bad propagation on 6 and 4m) I decide to put it in a box.
A spare hole filled with an RCA plug that is necessary for PPT and a new hole for the antenna PL connector. Before the metal work I make the wire work carefully as you can see on pictures ....
I disconect my ME4T 4m transverter from my FT-2000 and just put the plugs to the new 2m transverter. A short breath and fired up the Yaesu. I tuned directly to SV5VHF/b frequency at 144.850 (well is on 144.847 excactly...) and the keying from beacon comes clear and loud to my headphones with S-4. Unpluging the antenna from transverter and out it to FT-817 a see S-5.... Thats good news...
Tune to local repeater on FM the signal comes +40. Also good news. The RX part is fine. No birdies no unusual sounds and signals. And all functions and filters of FT-2000 is available....!!!
QSYing to local repeater again and optimizing the FM Mic Gain on FT-2000 menu I meet again on random George SV5KJO going to work.... The first thing that noticed is the " FB Audio" He comment also the clear signal. I explain to him that his box is filled with the small transverter .... "I nedd one of this too"....
This year I decide to stay out of competition on any band at AEGEAN VHF Contest and for first time my son Manos try on 6m band after his upgrade from SW (category 2) to SV (Category 1) prefix due the low for Radiomateurs change.
The indictment by the
apprehesion was: